10 Products with "construction supplies" Tag

Bentonite Waterstop

Doron Bentonite Waterstop is a flexible strip concrete construction joint waterstop that provides a positive seal by gradually expanding when in contact with water. Bentonite Waterstop is an active bentonite based waterstop that is designed to replace conventional passive PVC dumbbell waterstop, thus eliminating the requirement of split-forming and product seam welding. The key to Doron Bentonite Waterstop effectiveness is its modified sodium bentonite content which provides superior expansion to seal and fill voids. SIZES: ¾ inches x 5 meters Bentonite Base Concrete Joint Expanding Waterstop

C-Grout

Is a uniform mixture of selected sand, Portland cement, water reducing shrinkage compensating agent. It produces high early and 28 days strength with a slight but positive expansion from time of placement with no intermediate shrinkage occurring. (Non-Shrink, Non-Metallic Cement Grout) Complies with ASTM C-827; C-109 and C-191 Complies with CORPS OF ENGINEERING CRD-C624-80 PACKAGING: 25 kgs. Bag or pail

Cure

It is a white colored wax-based liquid concrete curing compound usually use for curing concrete surfaces like roads, sidewalks, gutters, concrete floor and walls, columns, dams, culverts where topping is not required. It seals the concrete surface and prevents water and moisture loss from the concrete matrix and will ensure complete hydration of the cement. Because of its sealing and curing characteristics, it has nothing to do with concrete cracks instead it helps avoid the occurrence of cracks. (Wax-Based Liquid Curing Compound) ASTM C-309 & AASHTO M-148 Type II Coverage: Approximately 300 square feet per gallon

Epoxy Bond

Is a viscous, two (2) components, 100 percent solids, solvent-free epoxy-resin system. After mixing the two liquid components, the result is a high viscosity epoxy-mix that is god bonding and repairing where a non-sagging material is required. All Purpose bonding Epoxy; Medium Viscosity) Conforms to: ASTM C-881 Type I, II, and III, Grade 2, Class B&C

Epoxy Grout

It is two (2) component epoxy – resin system; solvent free; 100% solids and low viscosity. Grouting and Injection Epoxy (Low Viscosity) (ASTM C-881; Type I; Grade I; Class C) It is ideal for grouting, for repairing damage concrete with hairline cracks by epoxy injection.

Fil (Cork)

Is made from selected granulated cork bonded with hot bituminous asphalt mixture and pre-molded between first class sheets of asphalt saturated felt paper. It is resilient, water and insect resistant and easily handled. It is pneumatic cushion. Its resilience and compressibility enable it to deform under pressure with no extrusion and almost total recovery in the range of 80% to 95% of its original thickness, as applied pressure is removed. Non-Extruding Type Concrete Joint Filler) Comply with: ASTM D-1751-65; AASHTO M-213-65 Federal Spec. HH-F-341e, Type 1

Moisture Barrier

A transparent polyethylene film of uniform thickness. It acts as a permanent moisture barrier under concrete slab floor. (Polyethylene Sheet) ASTM C171 PACKAGING: In rolls of two (2) meters wide.

PVC Waterstop

DORON PVC WATERSTOP (a high grade Polyvinyl Chloride resin and plasticizing agents) provides the excellent water sealing of the expansion joints, which also expands and contracts according to the expansion and construction of the concrete. Water Sealer on Concrete Joints Easy to install and can be welded, non-corrosive and chemical resistant, flexible and weather resistant.

RB-Cure

Is a resin-based liquid curing compound that dries up rapidly to form a tough, resilient, and colorless film. This film restricts water loss from the concrete matrix and retards water evaporation. (Resin-based Liquid Curing Compound) ASTM C-309 Type I & AASHTO M-148 Type I

Release Agent

Is a non-staining form oil that leaves a hard, clean and void free concrete surface. Concrete does not build-up on the forms, it does not affect the quality setting or strength of concrete or cement mortar with which it comes in contact. On metal forms, it will act as a mild rust inhibitor. On wooden forms, it tends to waterproof and preserve. Non-staining, Clean Stripping Release Agent and Form Preservatives (Non-viscous Mineral Oil Base)